Panasonic FP0H Series, User Manual

Page: 15 / 200

1.2 Restrictions on Combinations and Functions
1-5

Input signals of Control Unit
I/O
no.
Pulse output function
High-speed counter function
Count input
Reset input
Single-phase 2-phase
X0:
CH0 J-point positioning start
input
CH0 Count input
CH0 Count input
-
X1
CH1 J-point positioning start
input
CH1 Count input
-
X2 CH0 Home input - - CH0, CH1 Reset input
X3
CH2 J-point positioning start
input
CH2 Count input
CH2 Count input
-
X4
CH3 J-point positioning start
input
CH3 Count input
-
X5 CH1 Home input - - CH2, CH3 Reset input
X6
CH2 Home input - - -
X7 CH3 Home input - - -
(Note 1): When the reset input settings of reset input for the single-phase input overlap at CH0 and CH1 or CH2 and
CH3, the setting of CH1 or CH3 has priority.

Output signals of Control Unit
I/O
no.
Pulse output function
PWM output
Pulse output Deviation counter clear
Y0 CH0 CW or pulse output - CH0
Y1 CH0 CCW or sign output - (Note 2)
Y2 - CH0 -
Y3 CH1 CW or pulse output - CH1
Y4 CH1 CCW or sign output - (Note 2)
Y5 - CH1 -
Y6 - - -
Y7 - - -
Y8 CH2 CW or pulse output - CH2
Y9 CH2 CCW or sign output - (Note 2)
YA - CH2 -
YB CH3 CW or pulse output - CH3
YC
CH3 CCW or sign output - (Note 2)
YD - CH3 -
YE
- - -
YF - - -
(Note 2): When using the PWM output, the output numbers to be paired are normal output.
(Note 3): When using the target value match ON instruction (F166) or target value match OFF instruction (F167) in
the high-speed counter function, arbitrary output is specified in the range of Y0 to Y1F in a user program so
that it does not overlap the above functions.