Panasonic FP0H Series, User Manual, Page: 149 / 200

10.3 High-speed Counter Instruction
10-9

Allocation of control codes
•
The following bits are allocated according to the specified channel and functions.
FP0H mode
FP
Σ
mode
bit no.15
0
Software reset
0 0 0 0 0 0 0 0
8 7
0: Disable 1: Enable
H00: Fixed
Count 0: Enable 1: Disable
External reset input 0: Valid 1: Invalid
High-speed counter
instruction
0: Continue 1: Cancel
Channel specification
H0 to H3: CH0 to CH3
bit no. 15 4 3 2 1 0
Near home input
Reset input setting 0: Valid, 1: Invalid
High-speed counter instruction clear
pulse output stop
0: Continue, 1: Clear, stop
Channel specification
H0 to H3: CH0 to CH3
Software reset
0: Disable, 1: Enable
Count 0: Enable 1: Disable
0: Invalid, 1:Valid
•
When controlling the above functions using external inputs, arbitrary inputs can be allocated.

Example of program
The following example shows the program for performing the software reset of the high-speed
counter CH0 using the input X7.
X7
DT90052 H1
F0 MV
DT90052 H0 F0 MV
（ ）
DF
REFERENCE
•
For details of the allocations of I/O and flags, refer to "12.2.4 When Using
High-speed Counter Function".
• For details of the FP Σ mode, refer to "11. FP Σ Mode".