Panasonic FP-XH M8N16PD, User Manual

Page: 2 / 556

SAFETY PRECAUTIONS
To prevent accidents or personal injuries, please be sure to comply with the following items.
Prior to installation, operation, maintenance and check, please read this manual carefully for proper use.
Before using, please fully understand the knowledge related to the equipment, safety precautions and all
other precautions.
Safety precautions are divided into two levels in this manual: Warning and Caution.
WARNING
Incorrect operation may lead to death or serious injury.
●
Take appropriate safety measures to the external circuit of the product to ensure the security of
the whole system in case of abnormalities caused by product failure or external.
●
Do not use this product in areas with inflammable gases.
Otherwise it may lead to an explosion.
●
Do not put this product into a fire.
Otherwise it could cause damage to the battery or other electronic parts.
●
Do not impact, charge or heat the lithium battery, and do not put it into a fire.
Otherwise it may lead to fire or damage.
CAUTION Incorrect operation may lead to injury or material loss.
●
To prevent the excessive exothermic heat or smoke generation of the product, a certain margin is
required for guaranteed characteristics and performance ratings of relative products.
●
Do not decompose or transform it.
Otherwise it will lead to the excessive exothermic heat or smoke generation of the product.
●
Do not touch terminal blocks during power-on.
Otherwise it may result in an electric shock.
●
Set an emergency stop and interlock circuit in the external devices.
●
Connect wires and connectors reliably.
Otherwise it may lead to the excessive exothermic heat or smoke generation of the product.
●
Ground the protective earth (PE) terminal with Class D grounding (grounding resistance at 100
Ω
or below).
Otherwise it may result in an electric shock.
●
There shall be no foreign matters such as liquids, flammable materials and metals inside the product.
Otherwise it will lead to the excessive exothermic heat or smoke generation of the product.
●
Do not carry out construction (wiring, removal, etc.) during power-on.
Otherwise it may result in an electric shock.
Description on Copyright and Trademarks
●
The copyright of this manual is owned by Panasonic Industrial Devices SUNX Co., Ltd.
●
Unauthorized reproduction of this manual is strictly prohibited.
●
Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
●
Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation.
●
Other company and product names are trademarks or registered trademarks of their respective companies.
PLC_BATPE_ET