Panasonic FP-XH M8N16PD User Manual Download Page 167

Page: 167 / 556

10.3 Monitoring on Configurator PM7

10-9



Item monitoring

Item

Description

Related Page

Synchronous

master axis

When set as the master axis, "Main Station" will be displayed.

When set as the slave axis, the master axis based on such axis will be

displayed. E.g.) When axis-2 is set to be a slave following axis-1 as the

main station, "axis-1" will be displayed in the line of axis-2".

Axes not used for synchronized control will be displayed as [--------].

12.1

Synchronous

Control

Synchronize

output

Displays the synchronous running function set to the slave axis.

Gear, clutch, cam

Gear

＋

Clutch, Gear

＋

Cam, Clutch

＋

Cam

Gear

＋

Clutch

＋

Cam

Axes not used for master axis and synchronized control will be displayed

as [--------].

Synchronous

state

Displays the set status (synchronous/non-synchronous) of each axis.

Table number

executing

No. of data tables being executed or executed by position control data

9.4 Creating

Positioning

Data Table

Auxiliary output

code

When auxiliary output is enabled, the output codes are outputted within

the scope of 0-65536.

17.3 Auxiliary

Output

Amp current

value

Displays the feedback pulse value of the servo amplifier. It returns to "0"

on the completion of home return.

Unit conversion

current value

Displays the feedback pulse value after the unit conversion of the servo

amplifier.

It returns to "0" on the completion of home return. When the home

coordinate has been set, it will be preset to the home coordinate on the

completion of home return.

Torque

command (%)

Monitors the torque command value of the servo amplifier.

Actual speed

(rpm)

Monitors the actual speed of the servo amplifier.

Deviation

Monitors the deviation between the current position managed in the

control unit and the AMP current position fed back from the AMP.

17.12 Position

Deviation

Simple Monitor

Axis state

Displays the operation state of each axis.

"Operating" (green): The motor is running.

"Stopped" (gray): The motor stops.

"Error" (red): An error occurs.

Error code

The latest error code is displayed in case of an error.

Click [Clear errors] to remove the error.

19.3 Table of

Error Codes

Warning code

The latest warning code is displayed in case of a warning.

Click [Clear warning] to clear the warning.

19.4 Table of

Warning Codes

•

Click [Clear errors] to clear the error upon recoverable error of the control

unit.

•

Click [Clear warning] to clear the warning upon warning of the control unit.

Summary of Contents for FP-XH M8N16PD













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FP-XH M8N16PD

Reviews:

Brands by name

Popular brands

Panasonic FP-XH M8N16PD, User Manual

Search results

Summary of Contents for FP-XH M8N16PD

Reviews:

Brands by name

Popular brands