Panasonic DP-MB311EU, Operating Instructions Manual

Page: 87 / 144

Feature Code Selection
All FTP/SMB
address erase #578 To erase all FTP destinations and SMB folder destinations stored in the unit.
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable
M 0 N “
NO
” (default)
M 1 N “
YES
”
To erase FTP destinations:
1.
MtN A MBNM 5 NM 7 NM 8 N
2. M 1 N A “
YES
” A M OK N
3. M 1 N A “
YES
” A M OK N A MtN
To erase SMB folder destinations:
1.
MtN A MBNM 5 NM 7 NM 8 N
2. M 1 N A “
YES
” A M OK N
3. M 0 N A “
NO
” A M OK N
4. M 1 N A “
YES
” A M OK N A MtN
LAN mode #580 To select LAN mode.
Important:
R To set this feature, make sure that:
– The unit is in standby mode.
– The document is not set on the automatic document feeder.
– The delayed send feature is not activated (feature #412 on page 58).
M 0 N “
OFF
”
M 1 N “
WIRED
” (default)
M 2 N “
WIRELESS
”
Wireless status
*1 #581 If feature #580 is set to “
WIRELESS
” , you can check the status of the wireless
LAN connection by pressing MCN or MDN .
WPS-PBC
*1 #582 To set up the wireless LAN connection using WPS-PBC. This feature is the same
feature as pressing the
M WPS N button. See page 24 for details.
WPS-PIN
*1 #583 To set up the wireless LAN connection using WPS-PIN. See page 24 for details.
SSID search
*1 #584 To set up the wireless LAN connection by finding the SSID automatically on the
network. See page 25 for details.
Manual setup for
wireless
*1
#585 To set up the wireless LAN connection by entering the required information
manually. See page 25 for details.
Wireless restore
*1 #586 To restore all wireless LAN connection settings.
M 0 N “
NO
” (default)
M 1 N “
YES
”
1. MtN A MBNM 5 NM 8 NM 6 N
2. M 1 N A “
YES
” A M OK N
3. M 1 N A “
YES
” A M OK N
*1 These features are available only when feature #580 is set to “
WIRELESS
” .
87
10. Programmable Features