Panasonic DP-MB311EU Operating Instructions Manual Download Page 130

Page: 130 / 144

Close the internal cover and ADF cover.

Turn the power switch ON.

14.3 Cleaning the recording paper
feeder rollers of the
multi-purpose tray

Clean the recording paper feeder rollers when
documents fed from the multi-purpose tray frequently
misfeed.

Caution:

Do not use paper products, such as paper towels
or tissues for cleaning.

Turn the power switch OFF.

Press the button (

) and open the front cover.

You can clean the recording paper feed rollers (

)

with a cloth lightly moistened with water, and let all
parts dry thoroughly.

Close the front cover.

Turn the power switch ON.

14.4 Cleaning the pickup rollers

Clean the pickup rollers when documents fed from the
standard input tray frequently misfeed.

Caution:

Do not use paper products, such as paper towels
or tissues for cleaning.

Turn the power switch OFF.

130

14. Cleaning

Summary of Contents for DP-MB311EU

















































































































































Search results

Summary of Contents for DP-MB311EU

Reviews:

Related manuals for DP-MB311EU

Brands by name

Popular brands

Panasonic DP-MB311EU, Operating Instructions Manual

Search results

Summary of Contents for DP-MB311EU

Reviews:

Related manuals for DP-MB311EU

Brands by name

Popular brands