Panasonic DP-MB311EU, Operating Instructions Manual

Page: 77 / 144

Feature Code Selection
Fax number
re-entry #422 When “
ON
” is selected, if you dial a fax number manually using the dial keypad,
you have to re-enter the number and press MxN . When the 2nd entry number
matches the 1st entry number, you can send the fax.
M 0 N “
OFF
” (default)
M 1 N “
ON
”
Confirming the
next document #424 When “
ON
” is selected, after the document is scanned using the automatic
document feeder during fax memory transmission, the message shows to confirm
the next document. Insert the next document and press
M OK N . A MxN
M 0 N “
OFF
” (default)
M 1 N “
ON
”
Direct SMTP #425 For registering an email address when “
ON
” is selected, you can set the direct
SMTP for the email address.
M 0 N “
OFF
” (default)
M 1 N “
ON
”
Delivery notice #426 When “
ON
” is selected, a delivery notice is sent to the receiver of the Internet fax.
If the receiver returns the notice, a sending report will be printed.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
POP timer setting #428 To set the POP timer.
1. MtN A MBNM 4 NM 2 NM 8 N
2. Set the POP timer (the interval of receiving Internet fax automatically) to a
value between
“
00
” and “
60
” minutes using the dial keypad.
R The default is “
03
” minutes.
R If you do not want to receive an Internet fax automatically (page 65), set
the timer to
“
00
” .
3. M OK N A MtN
Fax send notify #429 To set the unit to alert you with a beeping sound after fax transmission is finished.
M 0 N “
OFF
” (default)
M 1 N “
ON
”
Auto reduction #432 To receive a fax document that is longer than your recording paper. When “
ON
”
is selected, the unit will fit received documents onto your recording paper.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
Fax activation
code #434 If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
To change the fax activation code
1.
MtN A MBNM 4 NM 3 NM 4 N
2. M 1 N A “
ON
” A M OK N
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN .
R The default code is “ H
#9
” .
4. M OK N A MtN
77
10. Programmable Features