Panasonic DP-MB311EU Operating Instructions Manual Download Page 18

Page: 18 / 144

Remove the protective sheet (

) from the drum

cartridge.

Do not touch or scratch the drum surface.

“

PAPER JAMMED

”

is displayed before the

protective sheet is removed.

After removing the protective sheet, re-install the
drum cartridge and lock it into place.

Remove the toner cartridge (

) from the protective

bag.

Shake the toner cartridge horizontally more than 5
times.

Detach the orange protective cover (

) from the

toner cartridge.

Do not touch the roller.

Hold the toner cartridge (

) by the centre handle,

then insert firmly to lock into place.

Close the front cover.

When to replace the toner cartridge and drum
cartridge

When the display shows the following, replace the toner
cartridge.
–

“

TONER EMPTY

”

–

“

TONER LIFE OVER

”

When the display shows the following, the toner cartridge
is coming to the end of its useful life. Please be prepared
to replace the cartridge soon.
–

“

TONER LOW

”

–

“

TONER LIFE LOW

”

When the display shows the following, replace the drum
cartridge.

2. Installation

Summary of Contents for DP-MB311EU

















































































































































Search results

Summary of Contents for DP-MB311EU

Reviews:

Related manuals for DP-MB311EU

Brands by name

Popular brands

Panasonic DP-MB311EU, Operating Instructions Manual

Search results

Summary of Contents for DP-MB311EU

Reviews:

Related manuals for DP-MB311EU

Brands by name

Popular brands