Panasonic DBS 40 Operating Manual Download Page 102

Page: 102 / 289

Section 700

3. Attendant Features

The DSS key LED informs the attendant of the status of assigned
extensions. The LED lights red when the extension is busy and green when

Absence Message, Calf

or DND is activated.

Pressing a DSS key while connected to an outside line places the line on
hold.

Headset Operation

(All Versions)

Description

A headset can be connected to attendant or non-attendant phones. (Dial
is normally turned

when the headset is connected.)

Operation

To use a headset:

Connect a headset to the telephone.

Press the

ON/OFF

key.

Press

1.”

The

ON/OFF

LED remains lit.

To stop using a headset:

Repeat the preceding steps.

Hard ware Requirements

Headsets are not provided with the DBS; they must be purchased
separately.

Most commercially available headsets (with

mike transducers) can

be used.

Considerations

Headset Operation is not available with SLT telephones.

Manual

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands