![background image](http://html.mh-extra.com/html/panasonic/dbs-40/dbs-40_operating-manual_264469038.webp)
Section 700 Operation
Chapter 2. System Features
l
(System): DISA Outbound Call ID Code 1
l
(System): DISA Outbound Call ID Code 2
l
FF2 (Trunk): DISA Auto Answer
l
FF2 (Trunk): DISA Start
l
FF2 (Trunk):
End Time
To program an incoming code from an attendant phone:
In addition to the DISA ID Setting in
the following procedure can be
used to program an incoming code.
1. Press the ON/OFF key.
l
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
2. Press the CONF key.
3. Dial
4. Enter the DISA code.
5. Press the HOLD key.
6. Press the ON/OFF key.
The ON/OFF LED goes off.
Hard ware Requirements
l
An
card is required for DISA. The
card is required to detect
DTMF tones entered via the DISA connection.
Considerations
DISA can be used to access extensions as well as outside numbers.
Once an incoming DISA code is entered, you cannot blank it out without
entering the programming mode.
l
Busy override cannot be used for a DISA line.
. With CPC-A and CPC-I3 Versions 2.0 to 2.1, DISA calls cannot access
hunt groups.
DBS-70-700
DBS Manual Issued
Page 2-23
Technical Manuals Online! - http://www.tech-man.com
Summary of Contents for DBS 40
Page 17: ...DBS 70 700 DBS Manual Issued 8 l 95 1 7 Technical Manuals Online http www tech man com ...
Page 87: ...Technical Manuals Online http www tech man com ...
Page 212: ...5 2 DE Manual Issued 8 l 95 DBS 7 7OCl Technical Manuals Online http www tech man com ...
Page 250: ...6 2 DBS Manual Issued 8 l 95 Technical Manuals Online http www tech man com ...