Panasonic DBS 40 Operating Manual Download Page 32

Page: 32 / 289

Section 700 Operation

Chapter 2.

teatures

Related Programming

(System):

Multiple DID (CPC-B Version 3.1 or higher)

(Extension): Inbound DID Dial Number (CPC-B Version 2.0 to 2.16)

FF4 (Ring): DID, Delayed, Night , Delayed Night, Night 2, and Delayed
Night 2 Ring Assignments

Hardware Requirements

Either the T-l Card or DID trunk card is required. Each DID trunk card
provides 8 ports.

The DID trunk card requires an external 48V power supply. See

Installation (Section

300) for instructions.

Considerations

The DID Trunk card supports

dial-pulse DID.

. The

card supports 4-digit, dial-pulse or

DID.

DID numbers must be between 0000 and 9999.

Beginning with CPC-B Version 3.1, a maximum of 500 DID/extension
settings is allowed.

DID Night Ringing Assignment

(CPC-B Version 5.0 or higher)

Description

For a description of this feature, see

Flexible Ring Assignments”

on page 18.

DBS-70-700

DBS Manual Issued

Page 2-17

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands