Panasonic DBS 40 Operating Manual Download Page 79

Page: 79 / 289

Chapter 2. System Features

Section 700 Operation

Considerations

Response to the Trunk Callback alert tone must be within sixteen seconds

or Trunk Queuing will be canceled.

If a call arrives from an outside line while the Trunk Queuing feature is

activated, Trunk Queuing will be suspended for the duration of the

incoming call.

If you are engaged in another call on a different line for more than twenty

minutes after the desired outside line becomes available, that outside line’s
assignment to you will be canceled.

The Trunk Queuing feature may

be used if you hear a busy tone when

trying to make a call using the Pooled Trunk Access feature.

Trunk Queuing can be used by all telephone types including

and

Universal Night Answer

Versionsj

Description

During night mode, Universal

Answer

sends

an external ringer, such as a night bell.

As an alternative to

using a

night bell,

can also be configured to ring

external paging speakers.

Night

calls can be picked up from any extension, provided

the

extension’s

of Service allows

answer.

Operation

To answer a UNA call:

1. Pick up the handset.

The phone issues intercom dial tone.

Dial “78.”

TALK #XX” appears on the display

“XX” = the trunk

number).

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands