Dell Inspiron 1440 Service Manual Download Page 1

Page: 1 / 47

Dell™ Inspiron™ 1440 Service Manual

Notes, Cautions, and Warnings

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Inspiron

are trademarks of Dell Inc.;

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell

under license;

Microsoft,

Windows

Windows Vista

, and

Windows Vista

start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States

and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Model PP42L

June 2009 Rev. A00

Before You Begin

Battery

Hard Drive

Optical Drive

Module Cover

Memory Module(s)

Wireless Mini-Card

Center Control Cover

Keyboard

Power Button Board

Palm Rest

Display

Camera (Optional)

Internal Card With Bluetooth

Wireless Technology

Speakers

USB Board

System Board

Processor Heat Sink

Processor Module

Coin-Cell Battery

Daughter Board

Battery Latch Assembly

Flashing the BIOS

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

CAUTION:

A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING:

A WARNING indicates a potential for property damage, personal injury, or death.

Summary of Contents for Inspiron 1440
















































Search results

Summary of Contents for Inspiron 1440

Reviews:

Related manuals for Inspiron 1440

Brands by name

Popular brands

Dell Inspiron 1440, Service Manual

Search results

Summary of Contents for Inspiron 1440

Reviews:

Related manuals for Inspiron 1440

Brands by name

Popular brands