background image

Back to Contents Page

  

 

 Battery Latch Assembly  

Dell™ Inspiron™ 1440 Service Manual 

 

  

Removing the Battery Latch Assembly 

 

  

Replacing the Battery Latch Assembly 

 

 

 

 

 

 

 

 

 

Removing the Battery Latch Assembly  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the system board (see 

Removing the System Board

).  

 

 

  

3.

Press and push the plastic clips on battery release latch to release it from the battery latch assembly.  
 

 

  

4.

Using a small screwdriver, remove the latch spring on the battery latch assembly.  
 

  

 

 

5.

Slide the battery latch assembly to the side and remove it from the computer base.  
 

  

 

Replacing the Battery Latch Assembly  

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on the back of the computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery

) before working inside the 

computer.

latch spring 

plastic clips 

battery latch assembly 

Summary of Contents for Inspiron 1440
















































Reviews: