Panasonic DBS 40 Operating Manual Download Page 185

Page: 185 / 289

Section 700 Operation

Chapter 4. Key Telephone Features

the AUTO key.

Enter the Speed Dial number for the telephone number.

Repeat steps 7 and for any additional Speed Diais

to be chained.

Press the HOLD key.

Press the

ON/OFF

key.

The ON/OFF LED goes off.

To assign a DBS Feature Code to a One-Touch key:

Press the ON/OFF key.

The phone issues intercom dial tone.

The

ON/OFF

LED lights.

Press the

PROG

key.

Press the One-Touch key to be programmed.

Enter the feature code.

Press the

HOLD

key.

Press the

ON/OFF

key.

The

ON/OFF

LED goes off.

To assign an Outside Telephone Number to a One-Touch key:

Press’ the

ON/OFF

key.

The phone issues intercom dial tone.

The

ON/OFF

LED lights.

Press the

PROG

key.

Press the One-Touch key to be programmed.

Press

CONF

followed by the Pooled Trunk Access code

If a pause is required, press the

REDIAL

key.

This inserts a pause between the access code and the telephone number.

DBS-70-700

4-75

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands