Panasonic DBS 40 Operating Manual Download Page 106

Page: 106 / 289

Section

700 Operation

Chapter 3. Attendant

Features

the personal VM key is not assigned to the lowest-numbered key, it will not
flash to indicate VM messages.

Station Lockout Code Assignment

(All Versions)

Description

The Station Lockout feature allows users to dial a Station Lockout code to
restrict their phone from being

used

for outside calls.

Station Lockout codes can be assigned through the attendant phone.

Operation

To program a Station Lockout code:

Press the

ON/OFF

key.

The phone issues intercom dial tone.

The

ON/OFF

LED lights.

Press the

CONF

key.

Dial

Dial the extension number.

Enter the desired key code (four digits).

Press the

HOLD

key.

“STORE XXXX” (where

is the key code) appears on the

display.

Press the

ON/OFF

key.

The

ON/OFF

LED goes off.

Considerations

A locked extension can be used for Intercom Calls.

Station Lockout key codes can also be set through system programming.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands