Panasonic DBS 40, Operating Manual

Page: 170 / 289

Chapter 4. Key Telephone Features
Section 700 Operation
Appearances
(CPC-AIL and CPC-B Version 2.0 or higher)
Description
When a key is programmed, it automatically provides direct station
selection
and
busy lamp field for the assigned extension number. If desired,
the key can also provide ring monitor.
For example, you can set extension A as a key on extension B.
When extension A rings, the LED of the key B
flashes. extension B answers the call by pressing the key, the
LED on extension A goes off and the call remains only on the key
of extension B.
Ringing can be set on either one or both extensions. If the extensions are not
set for ringing, the LED of the
key will flash red. If the extensions
are set for ringing, the LED will flash green.
When extension A is in use, the LED of the key on extension B will
light red. If one extension has the Absence Message, Call Forwarding, or
Not-Disturb feature activated, the
key will light green.
Operation
To assign a DSS/BLF key:
1. Press the
PROG
key.
2. Press the FF key you want to assign the appearance to.
3. Dial the extension number.
4.
Press the
HOLD
key.
To make an intercom call using the key:
Press the idle key.
To pick up a call on a key:
Press the flashing key.
4-60
DBS Manual Issued
DBS-70-700
Technical Manuals Online! - http://www.tech-man.com