Panasonic DBS 40 Operating Manual Download Page 36

Page: 36 / 289

Section 700 Operation

Chapter 2. System Features

To delete a

Answer Code:

1. Pick up the receiver or press the ON/OFF key.

Press PROG.

3. Dial

4. Press HOLD.

5. Press the ON/OFF key.

The ON/OFF LED goes off.

Related Programming

(System): Number of

Digits to Voice Mail

(System):

Flexible Ringing Assignments

Considerations

digit transmission. The

digits are only sent to ports

that are assigned as voice mail.

Answer code

The

Answer Code can be entered from an

attendant phone or a key phone that has entered the programming access
code.

ports and hunt groups.

The

digits can be sent to a specific

voice mail port or a. voice mail hunt group.

Second hunt group.

If the

call rings into a hunt group that in turn

transfers the call to a second hunt group, the

calls are not

transmitted to the second hunt group.

Third-par@

This feature can be used third-party voice mail systems. If

the feature is used with third-party voice mail systems, the voice mail can be
connected through analog extension ports or OPX ports.

ID.

When

calls are forwarded to voice

the Call

Forward ID Code is transmitted to the voice mail. The

digits are

not.

data transmission.

The

digits are transmitted over the

API link using the existing API key code packet.

DBS-70-700

DBS Manual Issued

Page 2-21

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands