Panasonic DBS 40 Operating Manual Download Page 266

Page: 266 / 289

Chapter 6. SLT Features

Section 700 Operation

5. Remain on the line until the called party picks up.

To answer Call Waiting (and disconnect the current call):

1. Replace the handset.

The current call is disconnected.

2. Pick up the handset.

You are automatically be connected to the extension sending the Call
Waiting.

To answer Call Waiting (without disconnecting the current call):

1. Flash the switchhook.

The current call is disconnected.

The new call is connected automatically.

2. Flash the switchhook again to retrieve the original call.

Related Programming

(System) Extension Class of Service Setting

and CPC-B

Version 3.1 or higher

FF3 (Extension): Extension Class of Service Assignment

and

CPC-B Version 3.1 or higher)

FF3 (Extension): Call

Considerations

Call Waiting can be used without entering a message code.

Extensions that have DND

activated,

have a call on hold, are ringing (from

another

call), or are engaged in a conference call cannot receive Call

Waiting.

Call Waiting cannot be sent to an ML key.

6-18

DBS Manual Issued

DBS-70-700

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands