Panasonic DBS 40 Operating Manual Download Page 94

Page: 94 / 289

Section 700 Operation

Chapter 3. Attendant Features

Press AUTO to backspace

and

erase the existing name.

Use the

sequences shown Table 3-l on page

to enter

letters and/or numbers.

Press FLASH after each letter or number.

Press CONF to switch between numbers and letters.

To store your entry, press HOLD.

Note: The name does not change on the extension until the extension goes off
hook.

To assign text to Call Waiting/OHVA Text Replies

and

B Version 4.0 or higher):

Pick up the handset or press ON/OFF.

2. Press PROG.

3. Dial

Dial l-5, depending on which text message you want to change.

Press AUTO to backspace and erase the existing name.

Use the

sequences shown in Table 3-l on page 3-10 to enter

letters and/or numbers.

Press FLASH after each letter.

Press CONF to switch between numbers and letters.

To store your entry, press HOLD.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands