Panasonic DBS 40 Operating Manual Download Page 110

Page: 110 / 289

Section 700 Operation

Chapter 3. Attendant Features

Considerations

The Traffic Measurement feature can be

accessed

from any display phone.

Usage data cannot be cleared item by item.

All data is retained until it is deleted, until 65.536 entries are made (at
which point the figures are reset to zero) or a

is performed.

A backup battery protects memory contents in case of power failure.

The System Speed Dial traffic measurement only includes outside calls.

Walking COS Confirmation

and CPC-B Version 3.1 or higher)

Description

The attendant can check the Walking TRS Class of Service ID code of any
extension.

For information on Walking TRS Class of Service, see “Walking TRS Class
of Service” on page 2-69.

Operation

1. Press ON/OFF.

2. Press.CONF.

Dial

plus the extension number.

The Walking Class of Service

code appears on the display.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands