Panasonic DBS 40 Operating Manual Download Page 173

Page: 173 / 289

Section 700 Operation

Chapter 4. Key Telephone

Features

key can be assigned to any of the pooled trunk groups. See “Pooled

Trunk Access” on page 4-80 for more information.

See

Separation” (page 4-64) for information on assigning both

ML and

keys to the same system (CPC-AII and CPC-B Version 4 or

higher).

Operation

Operation

Action

To originate a trunk call

Press an idle

key.

The key blinks (green) as the call is made.

To place a call on Exclusive Trunk Hold (page 4-36)

Press the

key.

To place a call on System Trunk Hold (page 4-17)

To transfer a call

Press

the HOLD

key.

Press

HOLD,

dial the destination exten-

sion, then press

PROG.

Related Programming

(System): Least Cost Routing (LCR) Access

FF2 (Trunks): Pooled Trunk Access for Group “9”

FF2 (Trunks): Pooled Trunk Access for Groups “8 l-86”

FF3 (Extension): Forced Least Cost Routing

(Keys): FF Key Assignments (all)

(LCR) LCR Settings (all)

Considerations

When all trunks in a group are busy, the corresponding

key lights

red.

If LCR is enabled,

keys can be assigned for trunk group 89.

However, the FF keys will not light.

Press the

key that flashes red to answer an outside call.

There are seven groups of outside lines: 9 and 81-86.

DBS Manual Issued

4-63

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands