![background image](http://html.mh-extra.com/html/panasonic/dbs-40/dbs-40_operating-manual_264469058.webp)
Section 700 Operation
Chapter 2. System Features
4. From your terminal communications program, type the following
command:
(where xxxx = the site’s password)
5. After the DBS responds, type P and then press Enter.
Follow the directions on the screen to access the desired program. (See
“Terminal Programming Commands.“)
Terminal Programming Through
Note: The DBS must be equipped with an MFR card and a
card to
terminal programming using this method.
When programming through a DISA trunk, perform the following steps:
Dial into the DBS through a
trunk.
2. Once you are connected, type
from your terminal communications
program.
3. After the DBS responds with
type P
and
then press Enter.
Follow the directions on the screen to access the desired program. (See
“Terminal Programming Commands.“)
Terminal Programming Through a CO Trunk and Operator Transfer
Note: The DBS must be equipped with an MFR card and a RAI card to allow
terminal programming using this method.
When programming through a normal trunk, perform the
steps:
I. Dial into the DB S through a normal trunk.
2. Ask the operator to place you on hold and dial
to transfer you into
remote programming.
3. After the DBS responds with
type P and then press Enter.
Follow the directions on the screen to access the desired program. (See
“Terminal Programming Commands.“)
DBS
Page 2-43
Technical Manuals Online! - http://www.tech-man.com
Summary of Contents for DBS 40
Page 17: ...DBS 70 700 DBS Manual Issued 8 l 95 1 7 Technical Manuals Online http www tech man com ...
Page 87: ...Technical Manuals Online http www tech man com ...
Page 212: ...5 2 DE Manual Issued 8 l 95 DBS 7 7OCl Technical Manuals Online http www tech man com ...
Page 250: ...6 2 DBS Manual Issued 8 l 95 Technical Manuals Online http www tech man com ...