background image

 

EL-MF877-00                                                                                                Page  1 
Template Revision B  

                 

 

 

 

 

  

PSG instructions for this template are available at 

EL-MF877-01

  

  

Product End-of-Life Disassembly Instructions

 

Product Category: Personal Computers

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP Pro 3005 Microtower Business PC 

 

           

            

           

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU 
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

Item Description 

Notes 

Quantity of 
items 
included in 
product

 

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 
           

2(1 sys 
board,  
1 P/S 
board)           

Batteries 

All types including standard alkaline and lithium coin 
or button style batteries              

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries             

Liquid Crystal Displays (LCD) with a surface 
greater than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps             

Cathode Ray Tubes (CRT) 

            

Capacitors / condensers (Containing PCB/PCT) 

            

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

            

6 (P/S board 
Capacitors) 

External electrical cables and cords 

            

Gas Discharge Lamps 

            

Plastics containing Brominated Flame Retardants 
weighing > 25 grams (not including PCBs or PCAs 
already listed as a separate item above) 

 Fans 

Summary of Contents for Pro 3005 - Microtower PC







Reviews: