Panasonic DBS 40 Operating Manual Download Page 73

Page: 73 / 289

Svstem Features

Section 700

Toll Restriction

(All Versions)

tion

Access levels, including the prohibition of long distance calls or after-hours

calls, can be assigned to specific extensions or CO lines using the Toll

Restriction feature. This minimizes non-business related calls and reduces

phone bills by only allowing long distance calls over designated lines.

The following access levels are available:

Table 2-2. Toll Restriction Types

Restriction

Characteristics

Restriction of outbound dialing. (911 Calls allowed with
Version 6.0 only.)

Inbound ringing trunks can be-answered by or transferred to Type 0 exten-
sions.

calls are allowed.

Group Call Pickup (intercom calls only)

Full restriction of outbound dialing (911 Calls allowed with
CPC-B Version 6.0 only)

Inbound trunk calls to all phones can be answered and/or transferred.

Intercom calls are allowed.

Group call pickup is allowed.

Local calls allowed

l-800 calls

Inbound trunk calls can be answered and transferred from a Type 2 phone.

Full restriction of international calls.

Full restriction of operator calls (old numbering plan)

Selectable restriction of operator calls (new NANP) see Notes.

Selectable restriction of Speed dial numbers.

Selectable restriction of

1 codes (see Notes for 911).

Restriction of up to 10 three-digit

codes (new NANP).

Restriction of up to 50 seven-digit numbers.

Inter-digit timing is set to 6 seconds.

Paae 2-58

DBS Manual issued

DBS-70-700

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands