Panasonic DBS 40 Operating Manual Download Page 205

Page: 205 / 289

Section 700 Operation

Chapter 4. Key Telephone Features

Station Lockout

(All Versions)

Description

Use the

Station Lockout

feature to dial a Station Lockout code that prevents

other users from using your phone.

To activate Station Lockout:

Press the

ON/OFF

key.

The phone issues intercom dial tone.

The

ON/OFF

LED lights.

Dial “74.”

“Enter Code

appears on the display.

Dial the Station Lockout code.

Press the

ON/OFF

key.

“Set

Lock” appears on the display.

To deactivate Station Lockout:

Press the

ON/OFF

key.

The phone issues intercom dial tone.

The

ON/OFF

LED lights.

Dial “74.”

“Enter Code

appears on the display.

Dial the Station Lockout code.

Press the

ON/OFF

key.

“Set Sta. Lock” disappears from the display.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands