Panasonic DBS 40 Operating Manual Download Page 241

Page: 241 / 289

Section 700 Operation

Dial the desired extension number.

Upon hearing busy tone, press “5.”

Chapter 5. DSLT Features

To transfer a call using OHVA

1. Press the

HOLD

key.

Dial the number of the extension to which the call will be transferred.

Your phone issues a busy tone if the extension is already on a call.

Press “5” and announce the call to be transferred.

If the transferred call is not accepted by the called extension, press the

FLASH

key to cancel the transfer.

Press “8.”

5. Replace the handset.

To answer the call from a

Press

CONF

to speak with the announcing party.

Press

CONF

again to disconnect the announcing party and return to the

original call.

Related Programming

(System):

(Automatic) Transfer

(System): Alert Tone for Busy Override OHVA

(System): Extension Class of Service Setting

and CPC-B

3.1 or higher)

FF3 (Extension): Extension Class of Service Assignment

and

CPC-B 3.1 or higher)

FF3 (Extension): Call

Considerations

Transfer is enabled, the held call is transferred as soon as the

extension sending the OHVA hangs up.

DBS-70-700

DBS Manual

5-31

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for DBS 40


































































































































































































































































































Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands

Panasonic DBS 40, Operating Manual

Search results

Summary of Contents for DBS 40

Reviews:

Related manuals for DBS 40

Brands by name

Popular brands