Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 89

Page: 89 / 179

Confirm that the label side is facing down.

Keyboard Base

Confirm that the label side is facing up.

To remove the card

Preparation

Save the data and close all applications.

Open the cover and confirm the SD Memory Card indicator (A) is off.

Disable the card function.

Click

on the task tray and click

Select the card.

These steps are not necessary when:

Removing the card after turning off the computer.

is not displayed.

The card does not appear in the list.

Remove the card.

Push the card so it comes out of the slot.

Draw it straight out.

Tablet

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands