Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 61

Page: 61 / 179

Insert the nanoSIM card into the nanoSIM card slot.

C A U T I O N

Do not insert the nanoSIM card upside down.

Close the nanoSIM card cover.

Insert the battery pack.(

Replacing the Battery Pack

)

To remove a nanoSIM card

Turn off the computer.

Turn over the computer, and then open the cover.

Make sure no foreign objects are under the computer.

Remove the battery pack. (

Replacing the Battery Pack

)

Open the nanoSIM card cover.

Push the nanoSIM card.

It will come out of the slot a little bit.

Pull the card all the way out as illustrated below.

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands