Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 128

Page: 128 / 179

Insert the computer from above the cradle and push the upper center of the computer all the way in.

Do not attempt to make connections if there is any object between the computer and the Cradle. Doing so could damage the computer
and the Cradle.

When locking the lever for disconnection, connect the cable for security to the security slot (A) on the side.

C A U T I O N

Do not attempt to move the Cradle while connecting the computer to the Cradle.

If the computer malfunctions while the Cradle is attached, disconnect the Cradle and check to see if the computer operates normally. If
the computer operates normally, the Cradle may be malfunctioning. Contact Panasonic Technical Support.

Disconnecting

Turn off the computer.

If the cable has been connected to the security slot on the side, remove the cable.

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands