Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 108

Page: 108 / 179

Serial Port

Connecting Serial device

Keyboard Base

Slide the cover to the arrow direction.
The cover is unlocked.

Open the cover.

Connect the serial device to the serial port (A).

Connect the serial device to the connector of the serial cable.

Tablet

Slide the cover to the arrow direction.
The cover is unlocked.

Open the cover.

Connect the serial device to the serial port (A).

Connect the serial device to the connector of the serial cable.

N O T E

When connecting a cable, be sure to secure it with screws.

It does not support serial mouse.

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands