Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 11

Page: 11 / 179

Detach Lock

Release Lever

Function (Fn) Keys

Keyboard

Touchpad (

Touchpad

)

Display Latch

Security Slot (Clamshell)

When the tablet is connected, both the tablet and keyboard base can be secured at the same time.

Security Slot (Keyboard base)

A Kensington cable can be connected. For further information, read the manual that comes with the cable.

USB 3.0 Port

LAN Port

Serial Port

DC-IN Jack

Pen Holder

Pen

Strap Hole

Security Slot (Tablet)

A Kensington cable can be connected. For further information, read the manual that comes with the cable.

Speaker

The speaker contains a magnet and magnetic products. Avoid leaving metallic object or magnetic media in contact with these areas.

SD Memory Card Indicator

(Blinking: During access or a password is requested)

microSD Memory Card Slot

Keep microSD Memory Cards away from infants and small children.

Headset Jack

A headset or headphone can be connected.

USB 3.0 Port (CHG)

Do not insert any foreign object in the USB port.

HDMI Port

LAN Port

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands