Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 88 | Manualshive

Page: 88 / 179

background image

SD Memory Card

SD Memory Card Information

The SD Memory Card slot on this computer accepts SD/SDHC/SDXC and microSD/SDHC/SDXC Memory Cards.
Tablet has a microSD memory card slot.
Keyboard base has a SD memory card slot.

Inserting/Removing the SD Memory Card

C A U T I O N

n

Do not remove or insert the SD Memory Card until Windows has completed loading.

n

Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.

While the computer is in sleep or hibernation.

While the SD Memory Card indicator is on.

While data is being read from or written to the card.

Immediately after the writing operation. The computer may still continue the access to the card just after writing operation. If you remove
the card before the operation is completed, the data may be damaged or the card access may no longer be performed normally.

n

Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages, direct or indirect.

To insert the card

1.

Slide the cover to the arrow direction.

The cover is unlocked.

2.

Open the cover.

Tablet

Keyboard Base

3.

Insert the SD Memory Card.

Tablet

«
...
86
87
88
89
90
...
»

Summary of Contents for CF-20 series




















































































































































































Reviews:

No comments

Related manuals for CF-20 series

Brand: Ohio Scientific Pages: 43

Brand: IBM Pages: 2

Brand: IBM Pages: 121

Brand: CompuLab Pages: 19

Brand: EUROCOM Pages: 271

Evo Desktop Series

Brand: Compaq Pages: 30

Brand: Vivo Pages: 12

Nuvo-8108GC Series

Brand: Neousys Technology Pages: 142

Brand: Korg Pages: 233

Brand: Lenovo Pages: 54

Brand: Lenovo Pages: 64

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 84

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 102

Brand: Lenovo Pages: 56

Brand: Lenovo Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands