Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 31

Page: 31 / 179

Button

Function

While operating OS

Rotation Lock

While operating the Setup Utility

ESC Key

You can change the button assign. (

Rotation Lock Button

)

N O T E

The Tablet buttons may not work immediately after Windows is started up or the Windows sign in screen (or the Welcome screen) is displayed.

Setting the Tablet Buttons

N O T E

You can have different settings for each user.

On the Windows sign in screen and Welcome screen, the tablet buttons are enabled and work in default irrespective of the settings you made.

To change the A1 / A2 button functions

You can change the functions of A1 and A2 buttons.

Click

(Start) - [Panasonic PC Settings Utility], and click

(Settings) -

(Button / Key).

Alternatively, click [Panasonic PC Settings Utility], and click

(Settings) -

(Button / Key) in the tablet mode.

Click [Settings] under “Tablet Buttons”.

Select the key and click [Change...].

Select the function in [Press] and [Press and hold].

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands