Panasonic CF-20 series Operating Instructions And Reference Manual Download Page 112

Page: 112 / 179

Other Functions

OCR Scanning

Click

. The icon is shown as

Point the window at the target text you want to scan, and click

on the right side

of the screen.

When the target text has been scanned, the scanned OCR text is displayed above the preview
window.

Copy the OCR text to the clipboard.

Retry OCR scanning.

Save the OCR text.

To stop scanning, click

N O T E

Installation of the option of the language pack is necessary in order to use the
OCR feature. If it is not installed, please download the optional feature (optical
character recognition) by the following procedure.

Click

(Start) -

(Settings) - [Time & language] - [Region & lan-

guage].

Click the language used for “Languages” and click [Options].

Click [Download] under “Basic typing”.

OCR feature can't be used in some languages which Windows doesn't support
OCR feature.

Summary of Contents for CF-20 series




















































































































































































Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands

Panasonic CF-20 series, Operating Instructions And Reference Manual

Search results

Summary of Contents for CF-20 series

Reviews:

Related manuals for CF-20 series

Brands by name

Popular brands