Panametrics GF868, Programming Manual, Page: 99 / 167

12/1/99
3-6 Logging Data
STARTTIME Prompt
If
OK
was selected, proceed to the
START DATE
prompt. If
NOW
was
selected, proceed to the
END TIME
prompt for a non-circular log or to
the DURATION prompt for a circular log. Refer to Figure A-7 on page
A-7 of Appendix A, Menu Maps for a clarification of the various
programming sequences.
START DATE Prompt
NAME,MESSAGE,etc. Press
[F1]
to accept the displayed
start time or press
[F2]
to enter a
different start time. To start
logging immediately, press
[F3] .
Is LOG circular ?
current selection appears here
STARTTIME hh:mm:ss XM
previous selection appears here
OK EDIT NOW
NAME,MESSAGE,etc.
Press [F1]-[F2] to select AM or
PM
. Then, enter the desired hour
(1-12) and press
[ENT]
. (Entry of
a start time earlier than the
current time will generate an
error message.)
STARTTIME hh:mm:ss XM
Edit
HOUR
previous value appears here
AM PM
NAME,MESSAGE,etc. Enter the desired minutes and
press
[ENT] . The acceptable
range is 0 to 59.
HOUR
current value appears here
MINUTES
previous value appears here
NAME,MESSAGE,etc.
Enter the desired seconds and
press
[ENT]
. The acceptable
range is 0 to 59.
MINUTES
current value appears here
SECONDS
previous value appears here
NAME,MESSAGE,etc. Press
[F1]
to accept the displayed
start date or press [F2] to enter a
different start date. To start
logging today, press
[F3]
.
previous prompt appears here
current selection appears here
START DATE dd MM yy
previous date appears here
OK EDIT TODAY