Panametrics GF868, Programming Manual, Page: 76 / 167

12/1/99
2-4 Displaying Data
The DUAL Sub-Menu
The DUAL format displays two measurements simultaneously in
normal print. To select the DUAL format and the measurements to
display in this format, follow the instructions in this section.
Upon power up, a BIG measurement mode display (similar to the one
shown below) appears. Press the appropriate side of the [SCREEN]
key to activate the desired pane of the display screen, and complete
the following steps:
Ch1 Channel Label site file
É
Press [
←]
and [
→]
and [F1]-[F4]
to select a channel option for
display. See Table 2-3 below for
a description of the available
options. Velocity Ft/s
6.95
(error codes appear here)
CH1 CH2 SUM DIF
Table 2-3: Channel Options
Option Description
CH1 Channel 1
CH2 Channel 2
SUM CH1+CH2
DIF CH1-CH2
AVE (CH1+CH2)/2
Ch1 Channel Label site file
É
The default power up screen is in
BIG
mode. Access the Display
Menu by pressing the
[DISP]
key.
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL -TOTL
DISPLAY FEATURES
É
Press [F2] to select the DUAL
option. The measurement mode
display reappears and the display
is now in the
DUAL format.
DISPLAY FORMAT
previous selection appears here
BIG DUAL GRAPH LOG