Panametrics GF868, Programming Manual, Page: 104 / 167

Logging Data 3-11
12/1/99
The MEM Sub-Menu
Use the MEM sub-menu to verify that the available log memory is
sufficient for the desired log. If the expected amount of logged data
will exceed the remaining memory capacity, the Model GF868
suggests that some old logs be cleared to make room for the new log.
Press the appropriate side of the [SCREEN] key to activate the desired
pane of the display screen, and refer to Figure A-7 on page A-7 of
Appendix A, Menu Maps while completing the following steps:
The
MEM
screen lists the number of remaining unused memory pages
out of the total number of 120 available pages. Also, the number of
pages expected to be used by all currently programmed logs is given.
If the number of pending pages exceeds the number of free pages,
additional memory may be made available by clearing some old logs
(see Chapter 5, Clearing Data).
Ch1 Channel Label site file
É
The default power up screen is in
BIG
mode. Access the Log Menu
by pressing the
[LOG]
key.
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL -TOTL
OPEN Start
Enter the assigned password and
press
[ENT]
. If the security
feature has been deactivated, this
prompt does not appear. See
Chapter 1, Programming Site
Data, for details.
ENTER PASSWORD
Password
LOG Start Press
[F2]
to select the
MEM
option.
LOGGING
previous selection appears here
STD MEM STOP ERROR
LOG MEMORY LEFT After noting the information,
press
[ENT]
to return to the main
Log Menu screen.
LOGGING
Memory
xxx/120 Pages FREE
xxx Pages PENDING