Panametrics GF868, Programming Manual, Page: 116 / 167

12/1/99
4-2 Printing Data
The DATA Sub-Menu
Use the DATA sub-menu to print live measurement data, as it is
collected. The data may be printed in either numeric or graphical
format, with a user specified time increment.
IMPORTANT:
Make sure that a printer has been properly set up
before proceeding with this section.
To print live measurement data, refer to Figure A-6 on page A-6 of
Appendix A, Menu Maps, and complete the following steps:
Note:
The Print Menu is not protected by the security feature and a
password is never required to access this menu.
Based on the response to the
FORMAT
prompt, proceed to either the
Numeric Format section or the Graphical Format section.
Ch1 Channel Label site file
É
The default power up screen is in
BIG
mode. Access the Print
Menu by pressing the [PRNT]
key.
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL -TOTL
PRINT Start
É
Press [F1] to select the DATA
option.
Print
previous selection appears here
DATA LOG PROG STOP
Print Data Press
[F1]
to print the data in
numeric format or press [F2] to
print the data in graphical
format.
PRINT
Print Data
FORMAT
previous selection appears here
NUM PLOT