Panametrics GF868, Programming Manual, Page: 128 / 167

12/1/99
4-14 Printing Data
The PRNTR Sub-Menu
Use the PRNTR sub-menu to specify the type of printer connected to
the Model GF868. To set up a printer, refer to Figure A-6 on page A-
6 of Appendix A, Menu Maps, and complete the following steps:
IMPORTANT:
A printer must be properly set up before proceeding
to any of the other sections in this chapter.
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
Note:
For compatibility with the Model GF868, the printer must
have an RS232 serial interface. To use a printer with a
parallel interface, a serial-to-parallel adapter must be used.
After the printer model has been selected, the Model GF868 returns to
the standard data display screen and normal measurement taking.
Ch1 Channel Label site file
É
The default power up screen is in
BIG mode. Access the Print
Menu by pressing the [PRNT]
key.
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL -TOTL
PRINT Start
É
Press the [
←]
or [
→]
key to
display the option bar shown,
and then press
[F1]
to select the
PRNTR sub-menu.
PRINT
previous selection appears here
PRNTR SGNLS
PRINT Start
É
Use the [
←]
, [
→]
and
[F1]-[F4]
keys to select the desired printer
type. See Table 4-5 below for a
complete list of the available
options.
PRINT
Type of printer
Printer Type
current selection appears here
DP411 XTECH EPSON KODAK
Table 4-5: Available Printer Options
Key(s) Printer Type Description
[F1] DP411 Seiko Model DPU-411 Type II
[F2] XTECH Extech Mini Serial Printer 42
[F3]
EPSON Epson or Epson-compatible
[F4] KODAK Kodak Diconix 150 Plus
[
→]
+[F1] SP401 Syntest SP-401