Panametrics GF868, Programming Manual, Page: 62 / 167

Programming Site Data 1-55
12/1/99
Option Card RTD Inputs
Option cards are available with RTD inputs having a temperature
range of –100 ° to 350°C. Complete the following steps to set up the
two RTD inputs of an option card installed in Slot x:
Note: The set up of RTD input A is used as an example. Identical
procedures would be used to set up RTD input B.
Global Analog Out Press
[F1]
to set up RTD input A
or [F2] to set up RTD input B. I/O
Slot x
Slot x Inputs
last input selected appears here
A B
Global Analog Out Enter a label of up to eight
characters for input A and press
[ENT]
.
Slot x Inputs
Input A
LABEL
current label appears here
Global Analog Out
Press [F1] to disable RTD input
A and return to the previous
prompt, or press
[F2]
to enable
RTD input A.
LABEL
current label appears here
Input measurement
last selection appears here
OFF TEMP
Global Analog Out Enter a value for the low end of
the chosen input range and press
[ENT]
.
Input measurement
Temperature
ZERO value
current value appears here
Global Analog Out
Enter a value for the high end of
the chosen input range and press
[ENT] .
ZERO Value
current value appears here
FULL Scale Value
current value appears here