Panametrics GF868, Programming Manual, Page: 125 / 167

Printing Data 4-11
12/1/99
Graphical Format (cont.)
The Model GF868 returns to the standard data display screen and
begins printing the log file. The printout continues until the entire log
has been printed or until a
STOP
command is issued (see the
instructions for the
STOP
sub-menu). A portion of a typical printout
is shown in Figure 4-4 below.
Figure 4-4: A Typical Graphical Printout
The PROG Sub-Menu
Use the
PROG
sub-menu to print the data in a site file that was set up
and saved as described in Chapter 1, Programming Site Data. To print
a site file, refer to Figure A-6 on page A-6 of Appendix A, Menu
Maps, and complete the following steps:
IMPORTANT: Make sure that a printer has been properly set up
before proceeding with this section.
Note:
The Print Menu is not protected by the security feature and a
password is never required to access this menu.
0.0
.1
.2
.3
.4
.5
.6
.7
.8
.9
1.0
0.0
.1
.2
.4
.3
.5
.7
.6
.8
.9
1.0
CHANNEL NAME
CHANNEL MESSAGE
X-AXIS 50 seconds PER-DIV
Y-AXIS MAX 500 ACF/M
START TIME
03:27:01 PM
20 OCT 97 END TIME
03:28:46 PM
20 OCT 97
Ch1 Channel Label site file
É
The default power up screen is in
BIG mode. Access the Print
Menu by pressing the [PRNT]
key.
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL -TOTL
PRINT Start
É
Press
[F3]
to select the
PROG
option.
PRINT
previous selection appears here
DATA LOG PROG STOP