Panametrics GF868, Programming Manual, Page: 67 / 167

12/1/99
1-60 Programming Site Data
The SECUR Sub-Menu
(cont.)
IMPORTANT:
Since the default password is printed in this manual,
a new password should be entered. If the password is
ever lost, contact the factory for assistance.
Note: Keep in mind that the password may have to be entered
frequently from the keypad. A long and/or complex password
may soon become annoying to use.
If
Unlck
was selected at the
LOCK OUT
prompt or
NO
was selected at
the
? EDIT PASSWORD
prompt, the programming sequence is
rejoined here.
Global SYSTM Enter the current password (2719
is the default password) and
press
[ENT] .
LOCK OUT
Locked
ENTER PASSWORD
Password
Global SYSTM
Press [F1] to leave the password
unchanged and return to the
Global PROGRAM
prompt, or
press
[F2]
to enter a new
password.
ENTER PASSWORD
Password
? EDIT PASSWORD
last selection appears here
NO YES
Global SYSTM
Enter the new password and
press
[ENT]
. Any combination of
letters and numbers up to a total
of 21 characters may be used as a
password.
? EDIT PASSWORD
Yes
ENTER NEW PASSWORD
Password
Global SYSTM Verify the new password by
entering it again and press
[ENT]
.
Be sure to record the new
password in a safe place.
ENTER NEW PASSWORD
new password appears here
VERIFY NEW PASSWORD
Password