Panametrics GF868, Programming Manual, Page: 126 / 167

12/1/99
4-12 Printing Data
The PROG Sub-Menu
(cont.)
Note: All site files currently in memory appear on the option bar.
The currently active site file (or working file) is always listed
as the first choice
(Work) on the option bar.
The Model GF868 returns to the standard data display screen and
generates a site file printout similar to the one shown in Figure 4-5
below. The printout continues until the entire file has been printed or
until a
STOP command is issued (see the instructions for the STOP
sub-menu on page 4-13).
Figure 4-5: A Typical Site File Printout
PRINT Start
É
Use the [
←]
, [
→]
and
[F1]-[F4]
keys to select the desired site file
to print.
PRINT
Print Program
SITE NAME
previous selection appears here
Work SITE1 SITE2 SITE3
PIPE PARAMETERS:
SYSTEM PARAMETERS:
Totalizer Option
System Units
no label no message
PROGRAM PARAMETERS of SITE1
ACTIVE PARAMETERS:
Site status
Skan/measure mode Burst
Skan Only
ENGLISH
Automatic
Volumetric Units
Volumetric Time
VOL Decimal Digits
TOT Decimal Digits
Totalizer Units
Thousands ACF
/min
0
Actual cubic ft
0
Pipe OD
Pipe Wall
Path Length
Axial Dimension L
Transducer number 81
12.000 inches
0.200 inches
16.97 inches
12.00 inches
Calibration Factor
.
.
. 1.000
.
.
.