Panametrics GF868, Programming Manual, Page: 61 / 167

12/1/99
1-54 Programming Site Data
Option Card Analog Inputs
(cont.)
The programming sequence is rejoined here, if
PRESR
or
TEMP
was
chosen at the input measurement prompt.
For instructions on setting up additional inputs and/or outputs
proceed to the appropriate section. Otherwise, press
[EXIT] twice to
return to the Global PROGRAM prompt.
Global Analog Out Enter a unit of measurement for
input A and press
[ENT]
.
INPUT NAME
current name appears here
INPUT UNITS
current units appears here
Global Analog Out Enter a value for the low end of
the chosen input range and press
[ENT] .
last prompt appears here
last selection appears here
ZERO value
current value appears here
Global Analog Out
Enter a value for the high end of
the chosen input range and press
[ENT]
.
ZERO Value
current value appears here
FULL Scale Value
current value appears here
Global Analog Out Press
[F1]
-
[F2]
to set up another
input or press
[EXIT]
to select
another slot for set up.
FULL Scale Value
current value appears here
Slot x Inputs
last input selected appears here
A B