Panametrics GF868, Programming Manual, Page: 78 / 167

12/1/99
2-6 Displaying Data
The GRAPH Sub-Menu
The GRAPH sub-menu permits the display of either the flow velocity,
the volumetric flow or the mass flow on an XY bar graph, with a
specified time interval on the x-axis. This section describes the
procedures for setting up and using the graph format.
Setting Up the GRAPH
Format
Press the appropriate side of the [SCREEN] key to activate the desired
pane of the display screen, and complete the following steps:
Note: The currently active display mode and channel option are not
relevant, as these parameters are set in the
GRAPH
option.
Ch1 Channel Label site file
É
From the current data display
screen, access the Display Menu
by pressing the
[DISP] key.
Velocity Ft/s
6.95
(error codes appear here)
CH1 CH2 SUM DIF
DISPLAY FEATURES
É
Press
[F3]
to select the
GRAPH
option.
DISPLAY FORMAT
previous selection appears here
BIG DUAL GRAPH LOG
DISPLAY FEATURES
É
Press [
←]
and [
→]
and [F1]-[F4]
to select a channel option for
display. Refer to Table 2-3 on
page 2-4 for a description of the
available options.
DISPLAY FORMAT
Graphical Display
DISPLAY
previous selection appears here
CH1 CH2 SUM DIF
DISPLAY FEATURES Press
[F1]-[F3]
to graph the Flow
Velocity, Volumetric Flow or
Mass Flow variable,
respectively.
DISPLAY
previous selection appears here
GRAPH VARIABLE
previous selection appears here
VEL VOLUM MDOT