Panametrics GF868, Programming Manual, Page: 127 / 167

Printing Data 4-13
12/1/99
The STOP Sub-Menu
Use the STOP sub-menu to terminate the printing of live, logged or
site data. To stop any active printing activity, refer to Figure A-6 on
page A-6 of Appendix A, Menu Maps, and complete the following
steps:
IMPORTANT:
Make sure that a printer has been properly set up
before proceeding with this section.
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
Note:
After the STOP command has been issued, the printer will
complete the printing of any data already in the printer buffer.
Either wait for the printer to finish or turn the printer off to
empty the buffer immediately.
The Model GF868 returns to the standard data display screen and
normal measurement taking.
Ch1 Channel Label site file
É
The default power up screen is in
BIG mode. Access the Print
Menu by pressing the
[PRNT]
key.
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL -TOTL
PRINT Start
É
Press
[F4]
to select the
STOP
option.
PRINT
previous selection appears here
DATA LOG PROG STOP
PRINT Start
Press [F1] to continue printing or
press [F2] to stop the currently
active printing job. PRINT
Stop Printing
STOP PRINTING
previous selection appears here
NO YES