Palfinger 200010121, Manual

Page: 56 / 435

53
Adjusting and testing installed tail lift
10.6 Attaching warning strips, safety point decals
(optional) and type plate
The scope of delivery of all PALFINGER Tail Lifts tail lifts includes
two warning strips. The warning strips are mounted according to the
enclosed "Installation instructions for warning strips" (drawing no.
92-597.99-00.00-00).
The safety point decals are only included in your scope of delivery
if your tail lift is equipped with wireless remote control. In this case
you will receive an installation diagram for the safety point decals
(drawing no. 08-522.99-04.00-01).

Mount the warning strips according to the enclosed assembly
instructions on the
PALFINGER Tail Lifts tail lift.

If available, mount the safety point decals according
to the supplied assembly instructions on the
PALFINGER Tail
Lifts tail lift.

Clean and degrease the surface for the type plate at the bottom
right of the platform.

Glue the supplied type plate to the platform.

Glue the test plaque on a prominent place.