Palfinger 200010121 Manual Download Page 306

Page: 306 / 435

Opening the Platform



Loosen the platform interlock (if present).



Press and hold pushbutton

(36)

until the platform has

reached the horizontal operating position.

Lowering the Platform



Press and hold pushbutton

(35)

until the platform has made

contact with the ground.

After the platform has touched the ground it tilts and adjusts
to the ground.

Lifting the Platform



Press and hold pushbuttons

(35)

and

(37)

simultaneously

until the platform has reached the vehicle loading floor
height.

The platform tilts to the horizontal or preset position before
it is lifted.

Closing the Platform



Press and hold pushbuttons

(36)

and

(37)

simultaneously

until the platform has reached the vertical transport posi-
tion.



Close the platform interlock (if present).

Summary of Contents for 200010121




















































































































































































































































































































































































































































Search results

Summary of Contents for 200010121

Reviews:

Related manuals for 200010121

Brands by name

Popular brands

Palfinger 200010121, Manual

Search results

Summary of Contents for 200010121

Reviews:

Related manuals for 200010121

Brands by name

Popular brands