Palfinger 200010121, Manual

Page: 325 / 435

74
Setting the BDF Position

Turn the rotary switches (27) and (29) simultaneously up-
ward and hold them in this position until the platform has
reached the vehicle loading floor height.

Turn the rotary switch (30) upward and hold it in this posi-
tion until the platform has reached the loading position.

Shift the movable stop on the guide rail until the outer initi-
ator is dampened.
Moving to the BDF Position

Turn the rotary switches (27) and (29) simultaneously up-
ward and hold them in this position until the torsion frame is
located above its horizontal position.

Turn the rotary switch (30) upwards.
The platform moves to the preset BDF position.

Turn the rotary switches (27) and (29) simultaneously up-
ward and hold them in this position until the platform has
reached the loading position.
Folding In and Retracting the Platform

Turn the rotary switches (27) and (29) simultaneously
downward and hold them in this position until the platform
has reached the ground.

Protect your hands with gloves.

Fold in the link bridge (if present).

Pull the handle with both hands to fold back the folding part
of the platform.

Turn the rotary switch (30) upward and hold it in this posi-
tion until the platform has reached the vertical position.

Tilt the platform with both hands forward by
approximately 20°.

Turn the rotary switch (30) upward and hold it in this posi-
tion until the platform has reached the vibration safeguard.
After the platform folded over automatically, it lifts itself into
the vibration safeguard.

Close the platform interlock (if present).